This product is pretty clearly a clone product. Logic probe pins seem to be directly wired to controller pins without any protection or other components there (different approach than in another USBEE AX clone). The main component are Cypress CY7CS8013A controller and TLC5510 (8-Bit, 20 MSPS ADC Single Ch., Internal S&H, Low Power). Here is a view on the circuit board inside the device: Ī product review would not be complete without seeing what what is inside. That but it could be fixed by doing pretty simple calibration procedure as told at. One thing I noticed when doing analogue measurement (oscilloscope, voltage meter), that there was 10% measurement error on the measurements I had: the computer showed around 10% higher values than the real voltage. There was also signal generation tools, and they all worked well… It provides traditional real time oscilloscope view to signals. It allows to view oscilloscope and logic signals on the same time scale, which is excellent for debugging embedded systems where there is both digital and analog signals.įor real time oscilloscope view the USBee AX Oscilloscope is the best choice. For mixed signal work where you capture the data and look it afterwards, USBEE Suite is the best choice. For individual testing of different functions the USBEE AX programs worked well.
#Usbee ax pro driver software#
I found that USBEE Suite and USBEE AX software package worked well.
#Usbee ax pro driver drivers#
In addition to drivers I had also had USB suite installed.
#Usbee ax pro driver Pc#
I already had drivers installed in my PC from an earlier test. The comment on HT-USBee AxPro page tells that to get it working you need to go to download page and get there USBee AX (Standard, Plus and Pro) software+drivers before connecting the device to computer. The product does not come with any software or documentation. The adapter pinout for digital seems to be same as used on other similar product: digital signals wired straight through and other signals left out.
The oscilloscope input is designed for +-10V signals and logic probe channels are suitable for normal TTL(5V)/LVTTL(3.3V) signal levels. The product is supplied with an adapter that allows connecting oscilloscope probe easily. With suitable software it can be used as Data Recorder, Voltmeter, Mixed Signal Oscilloscope and Logic Analyzer, Frequency Meter, Remote Controller, PWM Controller, Frequency Generator, I2C Controller and Pulse / Edge Counter. It features Oscilloscope Input (single channel, 16Msps, 3MHz bandwidth) and 8-CH Logic Analyzer. This HT-USBee AxPro is a said to be 8 Channel Logic Analyzer Oscilloscope Compatible USBee AX Pro I2C IIC SPI CAN Debugger. I found a cheap mixed signal oscilloscope product: HT-USBee AxPro.
0 kommentar(er)
